MaxVision Series 200
puts safety first.
MaxVision Series 200
is manufactured to the highest quality standards.
MaxVision Series 200
is available now.
Wet Reflective Removable Highway Marking Tape
ATM MaxVision Series 200 wet reflective removable highway marking tape is a preformed polymer road marking tape especially designed to temporarily mark asphalt and concrete surfaces. It is available in various roll widths and pre-cut legends. MaxVision Series 200 maximizes dry and wet retroreflectivity and is available in both white and yellow. This removable product is recommended for use during one construction season (less than one year) and is not designed to be snow plowed. Primer is recommended for use with this product under marginal conditions (see application instructions for specifics).
- Meets Or Exceeds ASTM D4592 Standard Specification For Preformed Retroreflective Pavement Marking Tape For Limited Service Life
- Meets Or Exceeds ASTM E1710 Standard Specification for Dry Retroreflectivity
- Meets Or Exceeds ASTM E2177 Standard Specification for Wet Recovery Retroreflectivity
MaxVision SERIES 200 Features
COMPOSITION
The MaxVision Series 200 consist of a pre-applied, pressure sensitive adhesive with high quality polymeric materials, pigments and glass beads assuring strong retroreflectivity for white and yellow tapes.
COLOR
MaxVision Series 200 are designed to meet DOT specifications for white and yellow marking tapes.
REMOVABILITY
This Series 200 of MaxVision tapes shall be removable from asphalt or concrete intact or in large pieces at temperatures above 40°F (5°C) without the use of heat, solvents, grinding or blasting.
APPLICABILITY TO PAVEMENT SURFACES
The MaxVision Series 200 shall be applied to clean and dry surfaces in accordance with the manufacturer’s recommendations. This product is designed with a pressure-sensitive adhesive to be applied at temperatures above 50°F (10°C). See Manufacturer’s Application Instructions included in each box.
SKID RESISTANCE
The MaxVision Series 200 of tapes will have an initial minimum skid resistance value of 45 BPN according to ASTM E 303.
PERFORMANCE REQUIREMENTS
MaxVision Series 200, when applied according to the manufacturer’s recommendations, shall provide a maximum service period of twelve months. In snow removal areas, plowing and / or tined concrete may shorten the tape’s life cycle.
Reflectance For MaxVision SERIES 200
Tape will have the following minimum results when tested in accordance with ASTM E1710 and ASTM E2177.
| White Pattern Tape Minimum retroreflectivity | DRY | WET |
| Entrance Angle |
88.76° | 88.79° |
| Observation Angle |
1.05° | 1.05° |
| Retroreflected Luminance, RI_ [(mcd • m-2) • IX-1] | 600 | 250 |
| Yellow Pattern Tape Minimum retroreflectivity | DRY | WET |
| Entrance Angle |
88.76° | 88.79° |
| Observation Angle |
1.05° | 1.05° |
| Retroreflected Luminance, RI_ [(mcd • m-2) • IX-1] | 350 | 200 |
-
We deliver safety. We deliver quality.
WE CAN DELIVER NOW
Still waiting for your highway safety tape supplier to deliver your supply?
You’re not alone. That’s why more companies and crews are switching to MaxVision Series 200 wet reflective removable highway marking tape. MaxVision meets ASTM’s highest standards. And we’re confident it will meet yours.
The quality you demand.
Our vertically integrated
manufacturing process
ensures that MaxVision Series
200 will deliver on every job.
The durability you demand.
Made with quality polymeric
materials, pigments and glass
beads, MaxVision Series 200
lasts up to 12 full months.
The performance you demand.
MaxVision Series 200 maintains adhesion to the road surface for the life of the installation and exceeds industry standards for reflectivity.
Ready to get to work now? Let’s go.
Contact us to learn more about MaxVision Series 200