|
|
|
| |
|
|
ATM PERMANENT SYMBOLS
Specifications for Permanent Series 180, 300 & 400 Preformed Polymer Marking Tape
|
|
| |
|
|
  |
| |
|
|
- Meets Or Exceeds ASTM D4505-01a
Standard Specification For Preformed Retroreflective Pavement Marking Tape For Extended
Service Life
Series 180 Rugged preformed
plastic, permanent marking tapes are designed to be inlaid or overlaid on asphaltic or
concrete surfaces. Series 180 tapes are suitable for markings that are subject to light
duty grade traffic volumes. Series 180 tape is available in various shapes, colors, and
roll widths.
Series 300 Durable preformed plastic, permanent marking tapes are designed for usage on
asphaltic or concrete surfaces. Series 300 tapes are suitable for longitudinal markings
and transverse markings including word/symbol markings. Series 300 Durable tape is
available in white, yellow and custom colors.
Series 400 Extended Life preformed plastic, permanent marking tapes are designed for usage
on asphaltic or concrete surfaces. Series 400 tapes are suitable for longitudinal markings
and transverse markings including word/symbol markings. Series 400 Extended Life tape is
available in white, yellow and custom colors. |
| |
|
|
|
PHYSICAL PROPERTIES |
| Composition: |
All Permanent Series Tapes consists of a pre-applied, pressure sensitive adhesive
with high quality polymeric materials, pigments and glass beads assuring long term
retroreflectivity. |
Applicability To
Pavement Surfaces: |
Ambient temperatures, 24 hours before and after, of 50°F (10°C) and rising. See
Manufacturers Application Instructions included in each box. |
| Adhesion: |
Permanent Series Tapes will adhere to asphalt or portland cement concrete roadway
surfaces when applied according to the manufacturer’s recommended procedures. |
| Pigmentation: |
Permanent Series Tape pigments are selected and blended to provide a marking tape
in white or yellow conforming to standard highway colors. |
| Skid Resistance: |
Permanent Series 300 and 400 tapes will have an initial minimum skid resistance
value of 55 BPN when tested according to ASTM E 303-83. Permanent Series 180 tape will
have an initial minimum skid resistance value of 45 BPN when tested according to ASTM E
303-83. |
| Reflectance: |
Permanent Series Tapes have the following minimum results when tested in
accordance with ASTM D4061. |
|
|
|
White |
|
Yellow |
| Entrance
Angle-Degrees |
|
86.0 |
|
86.5 |
|
86.0 |
|
86.5 |
| Observation
Angle-Degrees |
|
0.2 |
|
1.0 |
|
0.2 |
|
1.0 |
| Specific Luminance
(mcd ft-2 (fc)-1) |
|
500 |
|
300 |
|
400 |
|
175 |
|
Performance
Requirements: |
Series 180 tape, when applied according to the manufacturer’s
recommendations, shall provide a minimum service period of 12 months in light duty grade
traffic volume.
Series 300 tape, when applied according to the manufacturer’s recommendations, shall
provide a minimum service period of 16 months in light to moderate traffic volume.
Series 400 tape, when applied according to the manufacturer’s recommendations,shall
provide a minimum service period of 24 months in moderate to heavy traffic volume.
In snow removal areas, plowing may shorten tape’s life cycle. |
Statement of
Warranties: |
View Warranty & Returned Goods Policy |
|
|
|
