|
|
|
| |
|
|
ATM
Permanent Series 300, 300C & 400
Preformed Polymer Tape
Specifications
|
 |
| |
|
|
  |
| |
|
|
• Meets Or Exceeds ASTM D4505 Standard Specification For Preformed Retroreflective Pavement Marking Tape For Extended Service Life
Series 300 Durable preformed plastic, permanent marking tapes are designed for usage on asphaltic or concrete surfaces.
Series 300 tapes are suitable for longitudinal markings and transverse markings including word/symbol markings. Series
300 Durable tape is available in white, yellow and custom colors.
Series 400 Extended Life preformed plastic, permanent marking tapes are designed for usage on asphaltic or concrete
surfaces. Series 400 tapes are suitable for longitudinal markings and transverse markings including word/symbol markings.
Series 400 Extended Life tape is available in white, yellow and custom colors.
PHYSICAL PROPERTIES:
Composition: All Permanent Series Tapes consist of a pre-applied, pressure sensitive adhesive with high quality polymeric
materials, pigments and glass beads assuring long term retroreflectivity.
Applicability To Pavement Surfaces: Ambient temperatures, 24 hours before and after, of 40°F (5°C) and rising. See Manufacturer's Application Instructions included in each box.
Adhesion: Permanent Series Tapes will adhere to asphalt or portland cement concrete roadway surfaces when applied
according to the manufacturer’s recommended procedures.
Pigmentation: Permanent Series Tape pigments are selected and blended to provide a marking tape in white or yellow
conforming to standard highway colors.
Skid Resistance: Permanent Series 300 and 400 tapes will have an initial minimum skid resistance value of 55 BPN when
tested according to ASTM E 303.
Reflectance: Permanent Series Tapes have the following minimum results when tested in accordance with ASTM D4061.
|
|
White |
|
Yellow |
| Entrance Angle-Degrees |
|
86.0 |
|
86.0 |
|
86.0 |
|
86.0 |
| Observation Angle-Degrees |
|
0.2 |
|
0.5 |
|
0.2 |
|
0.5 |
| Specific Luminance (mcd ft-2 (fc)-1) |
|
1770 |
|
1270 |
|
1310 |
|
1000 |
| LTL 2000 Reflectometer |
|
800 |
|
500 |
Performance Requirements:
Series 300 tape, when applied according to the manufacturer’s recommendations, shall provide a minimum service period
of 24 months in light to moderate traffic volume.
Series 400 tape, when applied according to the manufacturer’s recommendations, shall provide a minimum service period
of 36 months in moderate to heavy traffic volume.
In snow removal areas, plowing may shorten tape’s life cycle.
Series 300 and 400 are also available with extended four and six year warranties. Please contact your ATM Sales
Representative for specifications.
If an installer has questions concerning the types of surface that preformed polymer tape can be applied or weather
conditions not referred to above, they may contact their local ATM Regional Manager or 252-536-2574 ext.138. |
| |
|
|
|
|
|
