Advance Traffic Markings - ATM 280 Hide-A-Line Tape Specifications
ATM 280 SpecificationsAdvance Traffic Markings - A Division of Patch Rubber Company
About
Traffic
Marking
Tapes
Permanent
Removable
• ATM 200
  Construction
  Tape
• ATM 280
  Hide-A-Line
  Tape
• Removable
  Rumble
  Strips
Symbols
& Legends
Custom
Signs
Facilities
Management
Specifications
MSDS Sheets
Application
Instructions
Application
Equipment
Download
Product
Literature
(PDF)
Credit
Application

 

 

 


         ATM 280 HIDE-A-LINE
Specifications for Removable Series 280
Temporary Preformed Polymer Marking Tape

Lead Free
ATM 280 Cross Section
  • Meets Or Exceeds ASTM D4592-01a Standard Specification For Preformed Retroreflective Pavement Marking Tape For Limited Service Life

Series 200 Removable Construction marking tape is a preformed polymer road marking film specifically designed for usage on asphaltic and concrete surfaces. It is available in various roll widths and pre-cut legends. Series 200 Removable Construction tape is available in white, yellow and custom colors.

Series 280 Hide-A-Line preformed plastic, removable marking tape is designed to adhere to tightly secured pavement marking materials , asphaltic and/or concrete surfaces. It is suitable for covering longitudinal or transverse markings including word/symbol markings. Series 280 tape is available in various shapes and roll widths.

PHYSICAL PROPERTIES

Composition: The Removable Series tapes consist of a pre-applied, pressure sensitive adhesive with high quality polymeric materials, pigments and glass beads assuring long term retroreflectivity for white and yellow tapes only. No glass beads used in ATM 280.
Removability: This Series of tapes shall be removable from asphalt or concrete intact or in large pieces at temperatures above 40°F (5°C) without the use of heat, solvents, grinding or blasting.
Applicability To
Pavement Surfaces:
The Removable Series tapes shall be applied to clean and dry surfaces in accordance with the manufacturer’s recommendations. Ambient temperatures, 24 hours before and after, of 40°F (5°C) and rising. See Manufacturers Application Instructions included in each box.
Pigmentation: The Removable Series of tapes pigments are selected and blended to provide a marking tape, in white or yellow, that will conform to standard highway colors throughout the expected life of the tape.
Skid Resistance: The Removable Series of tapes will have an initial minimum skid resistance value of 45 BPN according to ASTM E 303-83.
Reflectance For Series 120 & 200 Only: Tape will have the following minimum results when tested in accordance with ASTM D4061.
White      Yellow
Entrance Angle-Degrees     86.0     86.0      86.0     86.0
Observation Angle-Degrees     0.2     0.5      0.2     0.5
Specific Luminance (mcd ft-2 (fc)-1)     1360     760      820     510
Performance Requirements: Series 120 Tape is designed to direct traffic in or around work zones that have a three month or less duration.

Series 200 Tape, when applied according to the manufacturer's recommendations, shall provide a maximum service period of twelve months.

Series 280 Tape, when applied according to the manufacturer's recommendations, shall provide a maximum service period of twelve months.

In snow removal areas,plowing and/or tined concrete may shorten the tape's life cycle.
Statement of
Warranties:

View Warranty & Returned Goods Policy

 

         

 
Contact ATM Legal Information About ATM