• Meets Or Exceeds ASTM D4592 Standard Specification For Preformed Retroreflective
Pavement Marking
Tape For Limited Service Life
Series 200 Removable Construction marking tape is a preformed polymer road marking film specifically designed for usage on asphaltic and concrete surfaces. It is available in various roll widths and pre-cut legends.
Series 200 Removable
Construction tape is available in white, yellow and custom colors.
Series 280 Hide-A-Line preformed plastic, removable marking tape is designed to adhere to tightly secured pavement
marking materials, asphaltic and/or concrete surfaces. It is suitable for covering longitudinal or transverse markings
including word/symbol markings. Series 280 tape is available in various shapes and roll widths.
PHYSICAL PROPERTIES:
Composition: The Removable Series tapes consist of a pre-applied, pressure sensitive adhesive with high quality
polymeric materials, pigments and glass beads assuring long term retroreflectivity for white and yellow tapes only.
No glass beads used in ATM 280.
Removability: This Series of tapes shall be removable from asphalt or concrete intact or in large pieces at temperatures
above 40°F (5°C) without the use of heat, solvents, grinding or blasting.
Applicability To Pavement Surfaces: The Removable Series tapes shall be applied to clean and dry surfaces in
accordance with the manufacturer’s recommendations. Ambient temperatures, 24 hours before and after, of 40°F (5°C)
and rising. See Manufacturer's Application Instructions included in each box.
Pigmentation: The Removable Series of tapes pigments are selected and blended to provide a marking tape, in white
or yellow, that will conform to standard highway colors throughout the expected life of the tape.
Skid Resistance: The Removable Series of tapes will have an initial minimum skid resistance value of 50 BPN according
to ASTM E 303.
Reflectance For Series 200 Only: Tape will have the following minimum results when tested in accordance
with ASTM D4061.
|
White |
Yellow |
| Entrance Angle-Degrees |
86.0 |
|
86.0 |
86.0 |
|
86.0 |
| Observation Angle-Degrees |
0.2 |
0.5 |
0.2 |
0.5 |
| Specific Luminance (mcd ft-2 (fc)-1) |
1770 |
1270 |
1310 |
1000 |
| LTL 2000 Reflectometer |
800 |
500 |
Performance Requirements:
Series 200 Tape, when applied according to the manufacturer's recommendations, shall provide a maximum service
period of twelve months. In snow removal areas, plowing and / or tined concrete may shorten the tape's life cycle.
Series 280 Tape, when applied according to the manufacturer's recommendations, shall provide a maximum service
period of twelve months. In snow removal areas, plowing and / or tined concrete may shorten the tape's life cycle.
If an installer has questions concerning the types of surface that preformed polymer tape can be applied or weather
conditions not referred to above, they may contact their local ATM Regional Manager or 252-536-2574 ext.138.
