Advance Traffic Markings - ATM 200 Construction Grade Tape Specifications
ATM 200 SpecificationsAdvance Traffic Markings - A Division of Patch Rubber Company
About
Traffic
Marking
Tapes
Permanent
Removable
• ATM 200
  Construction
  Tape
• ATM 280
  Hide-A-Line
  Tape
• Removable
  Rumble
  Strips
Symbols
& Legends
Custom
Signs
Facilities
Management
Specifications
MSDS Sheets
Application
Instructions
Application
Equipment
Download
Product
Literature
(PDF)
Credit
Application

 

 

 


         ATM 200 CONSTRUCTION GRADE
Specifications for Removable Series 200
Temporary Preformed Polymer Marking Tape

Lead Free
ATM 200 Cross Section
  • Meets Or Exceeds ASTM D4592-01a Standard Specification For Preformed Retroreflective Pavement Marking Tape For Limited Service Life

Series 200 Removable Construction marking tape is a preformed polymer road marking film specifically designed for usage on asphaltic and concrete surfaces. It is available in various roll widths and pre-cut legends. Series 200 Removable Construction tape is available in white, yellow and custom colors.

Series 280 Hide-A-Line preformed plastic, removable marking tape is designed to adhere to tightly secured pavement marking materials , asphaltic and/or concrete surfaces. It is suitable for covering longitudinal or transverse markings including word/symbol markings. Series 280 tape is available in various shapes and roll widths.

PHYSICAL PROPERTIES

Composition: The Removable Series tapes consist of a pre-applied, pressure sensitive adhesive with high quality polymeric materials, pigments and glass beads assuring long term retroreflectivity for white and yellow tapes only. No glass beads used in ATM 280.
Removability: This Series of tapes shall be removable from asphalt or concrete intact or in large pieces at temperatures above 40°F (5°C) without the use of heat, solvents, grinding or blasting.
Applicability To
Pavement Surfaces:
The Removable Series tapes shall be applied to clean and dry surfaces in accordance with the manufacturer’s recommendations. Ambient temperatures, 24 hours before and after, of 40°F (5°C) and rising. See Manufacturers Application Instructions included in each box.
Pigmentation: The Removable Series of tapes pigments are selected and blended to provide a marking tape, in white or yellow, that will conform to standard highway colors throughout the expected life of the tape.
Skid Resistance: The Removable Series of tapes will have an initial minimum skid resistance value of 45 BPN according to ASTM E 303-83.
Reflectance For Series 120 & 200 Only: Tape will have the following minimum results when tested in accordance with ASTM D4061.
White      Yellow
Entrance Angle-Degrees     86.0     86.0      86.0     86.0
Observation Angle-Degrees     0.2     0.5      0.2     0.5
Specific Luminance (mcd ft-2 (fc)-1)     1770     1270      1310     1000
Performance Requirements: Series 120 Tape is designed to direct traffic in or around work zones that have a three month or less duration.

Series 200 Tape, when applied according to the manufacturer's recommendations, shall provide a maximum service period of twelve months.

Series 280 Tape, when applied according to the manufacturer's recommendations, shall provide a maximum service period of twelve months.

In snow removal areas,plowing and/or tined concrete may shorten the tape's life cycle.
Statement of
Warranties:

View Warranty & Returned Goods Policy

 

         

 
Contact ATM Legal Information About ATM